Corporación Aceros de Guatemala produces different types of AG Intupersa Structural Section brand steel tubing:
AG Special Tubing
·Galvanized Banana Tube:
The AG Intupersa banana tube used to assemble conveyors at the banana farms is manufactured with hot-rolled sheets measuring 6.70 meters (22 feet) and 6.10 meters (20 feet) in length. It has a single diameter measuring 1 ¼ with a wall thickness of 2.9 mm. This tubing has a minimum zinc covering of up to 360 g/m2.
·Galvanized Fence Tubing:
The AG Intupersa fence tubing is round, galvanized and smooth measuring 6 meters in length and is manufactured in 1 ½ and 1 ¼ diameters. The sheet thickness is 1.5mm. This tubing has a mínimum 65 g/m2 zinc coating.
·Black Exhaust Pipes:
The AG Intupersa brand exhaust pipes are round and non-galvanized, and measure 6 meters in length and used to manufacture motor vehicle exhausts. They are made of hot-rolled 2 ½ and 3 inch steel sheets, both measuring 1.5mm in thickness. These types of pipes are smooth.
The AG Intupersa structural tubing is made with hot-rolled steel sheets measuring 6 meters in length. It is used in the metal structure area.
Black and Galvanized Mechanical Tubing
The AG Intupersa black and galvanized mechanical tubing is round, made with hot-rolled steel sheets measuring 6 meters in length, and with a 1.5 mm and 1.8 mm sheet thickness. The black tubing is non-galvanized tubing. Galvanized tubing in both thickness measures has a minimum 65 g/m2 coating.
AG Intupersa industrial tubing is made with cold-rolled steel sheets. Three types are produced: squared, rectangular and round, in 18, 20, 21 and 22 sheets or gauges. It is cut at a length of 6 meteres and broadly used in metal and general carpentry. It is made in the following measures: